The Exceed-RC G2 is ready to fly out of the box within minutes. Everything needed to fly is included and installed such as a battery pack, motor, electronic and a 6 channel 72Mhz FM radio system. All that is needed are 8 “AA” batteries for the transmitter. Plus, each Exceed-RC G2 is test-flown at the factory to ensure precise performance and control which makes it truly ready to fly right from the box.

Exceed-RC G2

3D aerobatic capable 400 class size RC electric 6 channel 3D RTF helicopter

the Exceed-RC G2! READY TO FLY!

We are also proud to offer this magnificent model as 3D capable right out of the box. Combining the knowledge of RC nitro collective precision along with the most advanced micro electric design concepts, we have arrived at a model that excels prepared to wipe out the competition. The Exceed-RC G2 offers collective pitch control that will let helicopter pilots to fly in almost any direction. Transitioning from forward flight to hover with smooth, solid control is a cinch and negative pitch is a breeze for aerobatics like loops and rolls.

The installed mixing board controls mixing of the main and tail rotors. The board also contains speed controls, a external gyro for tail stabilizing and a BEC circuit that supplies power to the receiver and servos

Expect only the best as you experience tight, precise control and quick response as the Exceed-RC G2 will dazzle you with agility and speed. Using the basics of micro electric design to keep components light and durable while distributing heat away from electronic, the Exceed-RC G2 is not only precise, but also efficient. When you combine precision and efficiency and add beauty, you will arrive at the Exceed-RC G2: The Ultimate Super-Micro Electric Helicopter.

Advanced component configuration design provides perfect balance	High Quality External Electric gyro
High Efficient Belt Driven Tail Rotor Design	3D conversion and alterable pitch system provides solid and smooth control

Advanced component configuration design provides perfect balance  High Quality External Electric gyro

High Efficient Belt Driven Tail Rotor Design  3D conversion and alterable pitch system provides solid and smooth control

Pre-built Exceed-RC G2 400 size RC Helicopter, zero assembly time, Ready to fly out of the box
6 channel FM 72Mhz multifunctional transmitter with 3D conversion. PIT and PLT adjusting knob
Belt Driven Tail Rotor System
One-way bearing system. Flameout landing system
3-in-1 receiver unit (mixer, motor controller, receiver), High Quality External electric gyro
Computer Simulation Cable included (Computer simulation software not included)
English User Manual

Main Rotor Diameter:   630 MM 24.8 inch
Tail Rotor Diameter:    145 MM 5.7 inch
Overall Length:            610 MM 24 inch
Overall Height:            195 MM 7.7 inch
All-up Weight:             580g (battery included) 20 ounce
Battery:                      Lithium Polymer Battery
Power:                       380SD carbon brush motor
Servo:                        4 x 9g
Pitch Control:             rubber, alieron, elevator and throttle,
3D conversion and alterable pitch system
Radio System:            6 Channel FM 72Mhz, include a pair of interchangeable crystals
Charger:                    Quick 110V wall charger
Computer Simulation

Exceed-RC G2

Product Reviews
Overall Rating:
Total ratings of this item: 2
View All
Rate This Product:

This heli is a beast
Reviewer:
HeliPilot1964
October 17, 2008
Great machine, I actually had an accident one time which scratched up my car, but suprisingly the helicopter was still in good shape. I was expecting it to be a cheaply made copter, but that crash proved me wrong, my daughter had bought this for me for my birthday, and it was a good gift, since I used to fly real helicopter. Except now I can show off and do all sorts of aerobatic tricks to impress my grandchildren. I will probably be ordering from this company again, I had a good experience. Quick and painless…although the lines tend to be busy, but hey…once I get through, they are great people!

G2 beast
Reviewer:
AL
October 17, 2008
The G2 is the best monsterous helicopter i have ever purchased, its makes all those other helicotpers seems like crap. The G2 is so capable of being upgrade to a godly heli. Best purchase of my life.

One of the most difficult subjects to master is the model helicopter.

For this, the co-ordination on both of the transmitter sticks has to be first rate – someone once described flying a helicopter as being like balancing a pole on each hand, but with your arms crossed.

RC Helicopters :
4 Channel Electric Rc Helicopters – 4 channel helicopters are geared for people that want to learn the rc helicopter hobby and demand precise control that mimicks a full scale helicopter. Many of our 4 channel helicopters come with free flight simulator programs which you load onto you computer and connect the included computer cable to the helicopter remote control and your PC. Now you can practice flying RC helicopters on your computer with the real remote control! These remote control helicopters fly forwards, backwards, left, right, and hover too. Bank right, bank left, and perform all the maneuvers of a real helicopter. You can fly them outside and when are more experienced fly them right inside the house.

Helicopter designs have improved over the years and the introduction of gyros and other computer transmitter aids have made life much easier, but, even so, if you see an elderly person flying a helicopter with verve ans joie de vivre, the chances are that they have been flying their machines for quite a long time.

A step up from our 149.99 version. This electric Hughes 300 rc helicopter comes with a 4 channel remote control. Now you can fly left, right, forward, backward, and hover too. 4 channel helicopters are recommended for ages 12 and over. This rc helicopter is very stable when in flight and not hard to learn on. If you order today we will include a helicopter flight simulator program that you can practice with on the computer. Just hook the transmitter into your computer via the computer cable we give you and start practicing right on your computer. Check out the video below to see the helicopter in action. Yes, we carry all the spare rc helicopter parts for this heli and they are inexpensive!

Beginners RC Helicopters

The remote control helicopters below are great beginner helicopters. Our most recommended helicopter for kids and adults just wanting to fly inside their living room, office, or backyard is this RC helicopter. You will be amazed by the control and you can check out the video as well. It also flies well outside. If you are looking for an even more precise flying helicopter, then the Dragon RC helicopter packages with simulator are for you! All of our RC helicopters come fully assembled and ready to fly. All you have to do is charge the batteries and you are ready to enjoy flying your new RC helicopter. We also carry a large selection of toy helicopters that are great for all ages.

4 channel helicopters are geared for people that want to learn the rc helicopter hobby and demand precise control that mimicks a full scale helicopter. Many of our 4 channel helicopters come with free flight simulator programs which you load onto you computer and connect the included computer cable to the helicopter remote control and your PC.

Looking for an inexpensive easy to fly RC helicopter with a bit more control? The Extremely Easy To Fly helicopter below is a robust beginner’s machine which comes with everything a beginner would need, including our added upgrades.

If you are interested in a remote control helicopter that can be flown upside down and perform aerobatics then you need a 6 channel RC helicopter.

Kyosho Caliber 5 Gas 1/10th RC Helicopter ARF

Although the instruction manual will explain how to prepare your newly assembled gas rc helicopter for flight, it is one thing to read about it and another thing to be sure of doing it correctly.
A properly set-up helicopter will be easy to fly, relatively speaking; one out of balance, or with controls incorrectly harmonized, will give the operator endless troubles. If you can get professional help with the setting-up at this stage it will save a lot of heartache – and quite a few dollars.

The correct operation and setting of the engine is also an important factor, for example knowing how far to turn the main needle valve in, without the risk of the engine going too lean, getting too hot and cutting out, and obtaining a smooth, consistant transition throughout the throttle range is vital.

Kyosho Caliber 5 Gas 1/10th RC Helicopter ARF

Kyosho Caliber 5 Gas 1/10th RC Helicopter ARF

The all new Caliber 5 is a newly designed semi assembled 50 class helicopter. The lightweight monocoque composite frame

features a low stance for less rotating mass during axial 3D aerobatics. The Caliber 5 is designed with the the advanced

3D pilot in mind. The precision linkages and the sliding MMS tray are easily adjustable for new pilots input as well as

the precise demands of the advanced pilot. The Caliber 5 is easily converted to the Electronic Mixing System ( EMS) with

the optional linkage set and the supplied motor mount accepts both the YS and OS 50 class glow engine.

Features:

Carbon main rotors finished in gel coat are included as standard feature – at this incredible price.

Adjustment-friendly MMS control. Servo bed slides out so the variable pitch of each control input can be adjusted separately.

Aileron, elevator and pitch control all use push-pull linkages for sharp and reliable control.

The unique resin monocoque frame produces the strength and rigidity for superior 3D flight.

Radio box for receiver and battery provides organized management of wiring.

Equipped with 80cc sub fuel tank suitable for intensive 3D acrobatic flight.

Full ball bearing specifications including critical linkage bellcranks.

Latest styling from low height & lightweight brace and sharp body.

Semi-assembled mainframe and tail boom assembly means only a short time is needed to complete assembly.

Equipped with precision metal parts such as aluminum clutch drum and pulley combined with steel/resin swash plate, steel

head (yoke, center hub, see-saw) to meet the demands of 3D flying.

Converts to EMS (Electronic Mixing System) with optional linkage set. (CA5140)

Specifications:

Length: 1160mm

Width: 220mm

Height: 400mm

Weight: 3100g (approx)

Main Rotor: 1340mm

Gear Ratio: 9.6:1:5

Engine: 50 class

R/C System: 6-ch, 5 servos, 1 gyro for R/C helicopters